Coupling chains, as a most common transmission device, can not be sloppy when cleaning and using, otherwise it will affect its use effect. Coupling chains are generally designed with a hyperbolic arc to reduce friction and are used in places where the power is relatively large and the operation speed is relatively slow.

After each use, however, you must not forget to clean the Coupling chains, especially in rainy and humid environments. Require the use of dry cloth to wipe the chain and its accessories; If necessary, you can use an old toothbrush to clean the gaps between the chain pieces and remove the dirt and mud accumulated between the chains.

When cleaning Coupling chains, you can use warm, soapy water, but remember not to use strong acid or alkaline cleaning agents, as these chemicals can cause damage or even break the chain. Also, do not use solutions with added solvents to clean the Coupling chains, which can cause damage to the chain.

In addition, organic solvents such as cleaning oil should be avoided during the Coupling chains cleaning process, which will not only damage the environment, but also wash the lubricating oil from the bearing part. While we're on the subject of lubricants, the Coupling chains lubrication requirements should be highlighted.

Lubrication is very important to Coupling chains, so no matter what the structure of the chain, should be reasonable lubrication. There are two ways to do this work, one is direct lubrication, and the other is to clean and then lubricate.

The prerequisite for direct lubrication is that the Coupling chains themselves are relatively clean, and the lubricating oil products of sprinkler irrigation can be directly used to lubricate them. The Coupling chains are lubricated after cleaning, which is more suitable for the dirty state of the chain.

Coupling chains https://www.qj-chain.com/Coupling-chain.html